Sky Climber Tech Training – Quiz Online Training: 04-LOTO Level 1 Employee Name Employee Password (provided by Sky Climber; 3 or 4 digit password) Email 1. What does "LOTO" stand for? Lock On Tag On Lock Out Tag Out Lights Out Tag On None of the above 2. An Employee who locks or tags specific machines or equipment in order to perform servicing or maintenance is called? Affected employee Authorized employee Other Employee 3. All employees are responsible for enforcing they are properly trained to perform LOTO. True False 4. An employee who is required to use machines or equipment in which servicing is performed under the Lockout / Tagout standard is? Other employee Authorized employee Affected employee 5. An energy-isolating device is a mechanical device that physically prevents the transmission or release of energy. True False 6. Retraining of authorized or affected employees is required if? There is a change in Sky Climber LOTO procedure There is a change in a machine or equipment that presents a new hazard If there is reason to believe or a supervisor determines from periodic inspections and audits that additional training is required All of the above Retraining is not required 7. Who is responsible for enforcing Sky Climber Wind Solutions LOTO policy and ensuring all technicians are properly trained? Management Employees Both A&B 8. Lockout devices must work under the environmental conditions in which they are used. True False 9. A safety procedure which is used in industry and research settings to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion or maintenance or service work is_______. OSHA LOTO TOLO 10. Which devices are required to be isolated when working in elevated platforms on a blade? Tower Base / Cabinet Yaw Drives Rotor Lock Blade Lock Box All of the Above 11. All workplaces need to have a written Lockout/Tagout program in place. True False 12. Before implementing energy control procedures or performing maintenance and/or servicing operations, you should know ___________ . The sources of hazardous energy The magnitude and type of hazardous energy sources at the workplace The procedures that control hazardous energy All of the above 13. Lockout devices should be standardized within the facility by using the same _____. Color Shape Size Any of the above 14. Who may remove a personal lock from a machine? An affected employee The security manager The person who locks the lock The employee who sees the person locks the lock 15. How often must energy control procedures be inspected? Every three years At least annually Every two years [/et_pb_text][/et_pb_column] [/et_pb_row] [/et_pb_section]
